Equinox Systems MEGAPLEX Manual de usuario descargar pdf (Pagina 136)

AMIS Analog Networking

585-300-512 Issue 7

May 1999

Intuity System AMIS Administration

5-12Administer AMIS Analog/Message Delivery Parameters

4. Move through the following screen fields by pressing the or arrow

keys, and change any fields needed to implement the AMIS Analog

Networking or Message Delivery features:

a. CALLBACK NUMBERS

Enter the complete telephone number needed for the remote

machine to call the local system. The Local Number is the hunt

group number assigned to the analog voice ports.

The Country Code can have a maximum of four digits, the

Area/Trunk Number a maximum of seven, and the Local Number a

maximum of 15. However, the

complete

callback number (country

code, area/trunk number, and local number) cannot exceed 15

digits. A country code and an area/trunk number are always

recommended and may be required. Some examples of country

codes are:

■ If the local system is in the United States or Canada and

uses the public network, enter a

for the country code.

■ If you are in another country, enter the appropriate country

code (such as

for the United Kingdom). Country codes

should be listed in your local phone book.

■

ou may enter a country code of

to allow an Intuity system

to work in a mixed-vendor environment over a private

network. The code may be used for private networks in any

country.

On Intuity AUDIX 3.0 and later systems,

up to five callback

numbers may be defined. This allows different nodes to use

different telephone numbers to call the same AMIS machine. For

example, an AMIS analog network may include some nodes

accessed over the public network, and other nodes accessed over

a private network. Vendors other than Lucent Technologies may

also require the AMIS callback numbers to be administered in a

particular way. For convenience, callback numbers that are

administered on this screen are also listed on Page 2 of the

Machine screen, so you can easily select the appropriate callback

number you wish to use for each remote AMIS machine.

The default callback number is

. If a system with a single callback

number is upgraded to run 3.3 or later software, the existing

callback number will be placed in the default selection

. If an

additional callback number is defined on this screen and then

deleted, the Callback Number field on the Machine Profile screen

for any remote node that used that number will automatically be

changed to show the default callback number

. An entry will

appear in the administration log whenever callback numbers are

deleted or changed.

TAB

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 237 238

Comentarios a estos manuales

Sin comentarios

Equinox Systems MEGAPLEX Manual de usuario Pagina 136

Comentarios a estos manuales

Relacionado con productos y manuales para Software Equinox Systems MEGAPLEX